To adapt to the environment
Applicable to factories with A and B Ⅱ Ⅱ, Ⅱ c-class T1 ~ T6 group of combustible gases and vapors in mixture with air to form explosive place of 0, 1 zone and 2 zone, and the formation of combustible dust in mixture with air of 20, 21, 22 area explosive dangerous location.Such as petroleum, chemical industry, wharf, oil depot, ship, drilling platform, gas station, mine, port, aerospace, military industry, medicine, steel, fire cracker production, machinery, food processing and storage sites.
Product features
● Equipped with the latest SONY CCD program, the resolution of the analog camera can reach up to 800TVL;
● When visible light is insufficient, automatic day and night conversion, clear and meticulous color lifelike high-quality picture;
● Photosensitive performance is greatly improved, and the minimum illumination is as low as color 0.01Lux@F1.2;
● The latest fourth-generation wide dynamic technology, the dynamic range is greater than 75dB, the effect improvement is very obvious;
●3D digital noise reduction technology, increase the noise reduction processing of the original signal, the image at night is clean and bright;
● Optical grade high-strength and high-transmittance ultra-white explosion-proof glass, with light pass rate higher than 96%;
● Nano invisible wiper, not sticky water, not sticky oil, dust repellent;
● High hardness special carbon steel by fluorocarbon high temperature spray baking or stainless steel polishing/passivation process, explosion-proof, dust-proof, waterproof, rust-proof;
● Optional semiconductor silicon controlled temperature control module to realize automatic heating and cooling functions.
| model | TX-EX553-H1S(A/[A]/N)D | |
| certification | ||
| Explosion-proof marks | ExdⅡCT6Gb/ExtD A21 IP68 T80℃ | |
| Explosion-proof certificate No | CNEx15.3653 | |
| Mechanical properties of | ||
| The material | Carbon steel or 304 stainless steel | |
| Surface treatment | High temperature fluorocarbon spray baking or stainless steel primary color | |
| Protection grade | IP68 | |
| The interface specification | G-3/4" | |
| The weight of the | ≤8kg | |
| installation | wall | |
| Electrical performance | ||
| The input voltage | DC12V或AC110-240V | |
| Working current | ≤2000mA | |
| The camera | Imaging device |
5 megapixels 1/2.5 "CMOS sensor (network) 1/3SONY Super EFFIO HAD/Exview HADII CCD Sensor(simulated) |
| Effective pixels |
1.3 megapixels /2 megapixels (network) 700TVL(simulated) 2 million 1080P(coaxial HD) [SUPPORT AHD/HDCVI or HDTVI format] |
|
| The lens | 4mm/6mm/8mm/12mm/16mm | |
| Signal to noise ratio | ＞52db | |
| Minimum illumination | 0Lux(infra-red on) | |
| infrared | distance | 30m |
| The wavelength | 850nm | |
| On/off | Auto(≤10Lux) | |
| Electrical connection | Compound cable (network + power supply), or network cable, power supply separate outlet | |
| The environment | ||
| The environment temperature | （-30℃，+70℃） | |
| The atmospheric pressure | 80-106KPa | |
| Relative humidity |
≤95%RH(+25℃) |
|
