Product name: TXM-EX-MA (A/N)D vehicle-mounted explosion-proof camera
Product model: TXM-EX-MAAD [Simulation of aluminum alloy]
Txm-ex-mand [Aluminum alloy Network]
Manufacturing standard:
Gb3836.1-2010 Electrical Equipment for Explosive gas Environments -- Part 1: General Requirements
Gb3836.2-2010 Electrical Equipment for Explosive Gas Environment -- Part 2: Flameproof type "D"
Electrical equipment for The Environment with Combustible dust - Part 1 / Part 5: General requirements, Enclosure protection type "tD"
Explosion-proof marks: Exd Ⅱ CT6Gb/ExtD A21 IP68 T80 ℃
To adapt to the environment
Applicable to factories with A and B Ⅱ Ⅱ, Ⅱ c-class T1 ~ T6 group of combustible gases and vapors in mixture with air to form explosive place of 0, 1 zone and 2 zone, and the formation of combustible dust in mixture with air of 20, 21, 22 area explosive dangerous location.Such as petroleum, chemical industry, port, oil RIGS, gas stations, oil depot, ships, mines, ports, aerospace, military, medicine, steel, fireworks production, machinery, food processing and storage etc, especially suitable for oil tank truck, dangerous goods transport vehicles, tankers, a small warehouse, chemical laboratories, pharmaceutical factory workshop, such as explosion-proof elevator for place of a higher volume and weight requirements.
Product features
● Small size, light weight, flexible installation, can be used with GPS, vehicle-mounted DVR, dashcam, etc., as a dangerous goods logistics transport monitoring system image acquisition tool;
● Equipped with the latest SONY CCD program, the resolution of the analog camera can reach up to 800TVL;
● Photosensitive performance is greatly improved, and the minimum illumination is as low as color 0.001Lux@F1.2;
● The latest fourth-generation wide dynamic technology, the dynamic range is greater than 75dB, the effect improvement is very obvious;
●3D digital noise reduction technology, increase the noise reduction processing of the original signal, the image at night is clean and bright;
● Automatic IR CUT day and night conversion, clear and detailed color lifelike high-quality picture, equipped with synchronous infrared lamp night image outstanding;
● The infrared visual range of 15-25 meters, even in the case of poor light can still obtain high-quality images;
● Optical grade high-strength, high-light transmittance, ultra-white explosion-proof glass, light pass rate higher than 96%, completely eliminate the halo of infrared lamp;
● Nano invisible wiper, not sticky water, not sticky oil, dust repellent;
● Aviation grade aluminum alloy seiko or high-quality 304 stainless steel seiko manufacturing, explosion-proof, dustproof, waterproof;
● Aluminum alloy surface adopts special anodic process to form a high strength protective film, which is firm and wear-resisting, never fading;304 stainless steel primary color treatment, with mild corrosion resistance;
● Intelligent 3D circular design, easy to install the camera at any Angle after adjustment can get clear horizontal image.
| model | TXM-EX-MA（A/N）D | |
| certification | ||
| Explosion-proof marks | ExdⅡCT6Gb/ExtD A21 IP68 T80℃ | |
| Explosion-proof certificate No | CNEx16.2999 | |
| Mechanical properties of | ||
| The material | Aluminum alloy | |
| Surface treatment | Aluminium alloy anode | |
| Protection grade | IP68 | |
| The interface specification | G-1/2" | |
| The weight of the | ≤1kg [aluminum alloy], ≤1.6kg [stainless steel] | |
| installation | Ceiling mounted, wall mounted | |
| Electrical performance | ||
| The input voltage | DC12V | |
| Working current | ≤1A | |
| The camera | Imaging device |
1/2.5 "progressive scanning high sensitivity CMOS sensor 1/3Sony Super EFFIO HAD/Exview HADII CCD Sensor(simulation) |
| resolution |
1.3 megapixels /2 megapixels (network) 700TVL(simulated) 2 million 1080P(coaxial HD) [SUPPORT AHD/HDCVI or HDTVI format] |
|
| The lens | 4mm/6mm/8mm/12mm | |
| Signal to noise ratio | ＞52db | |
| Minimum illumination | 0Lux(infra-red on) | |
| infrared | distance | 15-25m |
| The wavelength | 850nm | |
| On/off | Auto(≤10Lux) | |
| Electrical connection | The composite cable | |
| The environment | ||
| The environment temperature | （-30℃，+70℃） | |
| The atmospheric pressure | 80-106KPa | |
| Relative humidity |
≤95%RH(+25℃) |
|
